U-Reach UB908U3 1 to 7 Intelligent 9 Ultra High-Speed U3 Series USB 3.2 Duplicator and Sanitizer

2 Different Copy Modes

Quick Copy Mode
The duplicator automatically copies only the data area, supports Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX).

Whole Media
The duplicator copies from the initial sector to the end, bit-by-bit.

Transfer Speed

U-Reach NV-BMS4 duplicator copies up to 10 GB/min on all devices simultaneously, without any speed degradation as number of targets increase.

Sanitization Functions

Swappable Modular Sockets

The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.

Quality Testing/Checking Functions

Capacity Check
Verifies the initial sector and the final sector of the connected flash device within 2 seconds.

H3 Read Only Test
This function tests the readability of every sector on the connected USB device(s) and provides an average read speed. This test will not alter the data on the device(s).

H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, the devices are then formatted into FAT.

H6 Quality Test
Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.

Supports Various USB HDDs

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

Event Log Report

The U-Reach USB duplicator has a unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each device completely.