2 Different Copy Modes
Quick Copy Mode
The duplicator automatically copies only the data area, supports Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX).
The duplicator copies from the initial sector to the end, bit-by-bit.
U-Reach NV-BMS4 duplicator copies up to 10 GB/min on all devices simultaneously, without any speed degradation as number of targets increase.
Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards
Secure erase functions wipe drive contents within seconds.
Quick Erase: This function only erases the HDD index.
Full Erase: This function will erase all HDD sectors.
DoD Erase: This is to comply with the DoD 5220.22.
Swappable Modular Sockets
The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.
Quality Testing/Checking Functions
Verifies the initial sector and the final sector of the connected flash device within 2 seconds.
H3 Read Only Test
This function tests the readability of every sector on the connected USB device(s) and provides an average read speed. This test will not alter the data on the device(s).
H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, the devices are then formatted into FAT.
H6 Quality Test
Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.
Supports Various USB HDDs
Due to the unique redundant power design, the duplicator can support
USB 2.0/3.0 external USB hard drives.
Monitor real-time status via PC through USB cable link.
Event Log Report
The U-Reach USB duplicator has a unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each device completely.